Shift System Fault Ford Fusion – How to Diagnose and Fix the Issue?

shift system fault ford fusion

Family drivers, as well as commuters alike, favor the Ford Fusion, a sleek and useful mid-sized car. However, it isn’t immune to issues, particularly with its shift mechanism, much like every other automobile. How do you interpret “Shift System Fault Ford Fusion”? Here we’ll go more deeply into shift system issues. We’ll go through each of these reasons and offer some advice on how to fix the issue.

‘Shift System Fault Ford Fusion’ – What Does It Mean?

A shifting system issue has been discovered by the powertrain management module (PCM) whenever a “Shift System Fault” warning and checking motor light flash.

Whenever this light turns on, the PCM’s memory keeps a fault code. The light’s illumination reason is indicated by this code, along with any potential solutions.

Your Ford car reported the fault codes P0756 as well as P0766. “C” as well as “D” efficiency codes for the shift solenoids.

It may be concluded from this that whenever these solenoids are used, the PCM fails to accurately detect shifts.

This could indicate a problem with an inside transmission, the solenoid, a valve’s body, or an inadequate reservoir of fluid.

Professional service bulletins are not yet accessible for this problem. There is, nevertheless, a recall.

Remember that 20B34 refers to the gearbox cooler’s possible failure? The Ford vehicle will receive a free replacement transmission cooler.

Your issues might arise if the cooling system malfunctions, as well as if your transmission fluid levels are low. When the cooler hasn’t really collapsed, you need to have your transmission analyzed to identify the root of the issue.

What are the Most Frequent Reasons Ford Fusions have Shift Mechanism Fault Errors?

Ten shifting system faults have been identified. It’s crucial to determine the shifting system fault you are encountering since the reason and recommended course to take might differ greatly. Let’s talk about why they usually happen.

The Shift Sys Fault Verifies the Park Brake

The system malfunction that caused this error. The parking brake must be removed before getting out of the car, which will cause the mistake to be visible to drivers.

System Shift Fault When the transmission won’t shift, secure the car using the parking brake.

The two errors are remarkably similar to one another. Whenever this error message appears, drivers must use the brake to park before getting out of the car.

This problem is a result of a system breakdown as well, which the dealer will need to properly diagnose.

Change Sys Fault Service Is Necessary

The shifter being loose or becoming detached from the gearbox may be the cause of this error reading. It could also be the result of a system flaw.

System Shift Fault is Putting the Car in Park

As the motorist shifts to park, this mistake happens. There are a variety of probable causes for this error code to appear.

The gears might be dusty or rusted when the driver tries to shift towards the park.

Shifting that is slow as well as sluggish can also be brought on by low transmission lubrication.

Service is Needed Due to a Shift System Problem

Whenever you try to shift into reverse, this mistake happens. The shifting cables and the computer may interact with each other through a computerized shifter in the Ford Fusion. With this interaction, there may occasionally be a glitch or problem.

Availability of the Shift Sys Fault Drives If drive maintenance is necessary, select S

Sadly, to diagnose this mistake, a diagnosis program must read the data from your automobile. This is because a wide range of problems might be the root of this warning.

Availability of the Shift Sys Fault Driver For Drive Maintenance Required, choose L

A shifter wiring will probably need to be changed after your car has been examined, as well as after the issue has been located.

It is necessary to use the fault-neutral shift system

Shifter wire failure is most likely to blame when neutrality stops working. To conduct a diagnostic, speak with your dealer.

Sports are unavailable due to a shift system breakdown

You should speak with your dealer to get the car diagnosed if you are unable to enter Sport mode.

Shift system malfunction low necessary services unavailable

A message of this kind, like other kinds of error notifications, is probably the result of an electronic device or circuit problem. To accurately identify the issue, it is advisable to get in touch with a dealer as quickly as possible.

What Signs Indicate a Shift System Fault in a Ford Fusion

What Signs Indicate a Shift System Fault in a Ford Fusion?

The Ford Fusion Shift System problem has a few signs and symptoms. Sometimes the automobile might not shift completely or may never shift correctly.

Furthermore, when shifting gears, the gearbox may seem jerky and unsteady. You should take your automobile in for examination if you experience one or more of these signs.

Ford Fusion Shift System Fault: Ways to Fix?

Switch Out the Solenoid

In order to replace the shift solenoid in your Ford Fusion, you’ll need some mechanical expertise and specific tools. While replacing the solenoid alone on your own is doable, your automobile needs to be serviced by qualified experts.

Switch Out the Shift Cable

It can be a challenging job to replace a snapped shifter cable, just as changing the solenoid. You may have a qualified mechanic examine your Fusion.

Refill the Transmission Oil

  • Using the dipsticks, determine the transmission’s fluid content.
  • The dipstick should be taken out and cleaned with a cloth that is free of lint.
  • Dipstick should be reinserted, taken out again, as well as fluid level checked.
  • Check the type of liquid being used by opening the transmission’s fluid container.
  • Avoid overfilling the gearbox by adding the fluid gradually via the dipstick tube.

Following the addition of the fluid, wait a short while before using the dipstick to recheck the fluid levels.

Replace the transmission fluid by draining it.

Find the pan holding the transmission’s fluid.

Drainage the transmission liquid utilizing a drain pan to catch the liquid.

The transmission liquid pan is secured in place by nuts that may be removed with a socket tool.

Make careful you thoroughly clean the transmission liquid pan, getting rid of any dirt or pollutants.

Put a new gearbox filter if the car has one.

Use a socket wrench to tighten the bolts after reinstalling the transmission’s fluid pan.

The specified transmission fluid should be used to fill the gearbox.

The dipstick should be used to measure the level of fluid, and extra fluid should be added if necessary.

Watch this one,

Video Credits – Raymond Barnes

You May Also Like


Please enter your comment!
Please enter your name here